How to Upload an Stl File to Tinkercad
How To employ TinkerCAD to Fix .stl files
How To use TinkerCAD to Fix .stl files
Every bit a 3D modeller, I similar to think the designs I spend weeks edifice come out perfect and set to 3D print.
Like all modelers, realty hits difficult when I open the .stl in the slicer program. All modelers know the frustration of finding gaps, holes, and other errors in our pattern.
In a previous blog I reviewed different CAD programs. Amid them, TinkerCAD has actually become my preferred mode to fix pattern errors from other design programs. With my 3DHubs site, I have used TinkerCAD to fix errors in clients files. I take also used information technology to run across special pattern request from my clients.
WiFi Case Instance
A 3DHubs client ordered a case for his WiFi finder . Merely with his hardware, he did not need an antenna hole in the back of the instance.
plug that was put into the original .stl file using TinkerCAD.
With TinkerCAD, yous can import .stl files to change.(fix two) You but import them directly into your workplane.
For this case, I made a plug to fit the hole, and so grouped it to the main trunk
You can easily make plugs to fit any gaps or holes in your designs using TinkerCAD. By grouping them to the original file, you can shine out what other design programs may miss.
The final result was a WiFi example with no antenna pigsty in it. I'll post the remixed file hither.
Spool of Thrones Remix
[caption id="attachment_3798" align="alignnone" width="600"]
Spool of Thrones tool/spool holder.[/caption]
TinkerCAD can also be used to remix previous designs. In a previous blog I wrote about a spool holder I made for my Lulzbot Taz 5 3D printer. The original holder takes about viii hours to print at 0.4 mm resolution. While it is beefy enough to handle the heaviest spools of filament, I realized that information technology is missing something.
I've had a few spools of filament tangle badly on me. Every time this has happened, I was scrambling aimlessly to get to my wire cutters, which had subconscious themselves away nether my printer.
It was at this point that I remember a lesson from the fishing boats of Alaska. When fisherman work around their nets and lines that can apace tangle around them, they carry a sharp knife close to them in instance they have to quickly cut themselves loose.
I wanted a way to store a pair of wire cutters adjacent to the spool.
I took some quick measurements the tools I wanted to put in this modified holder, and used that to brand hole blocks in TinkerCAD.
[explanation id="attachment_3795" marshal="alignright" width="209"]
Rotation control arrows in TinkerCAD.[/caption]
In TinkerCAD, you use double arrows to rotate your designs. I used this to rotate the holes to an orientation that fit the original spool holder.
I then used the Mirror tool to mirror the holes then they were symmetric on the other side.
I could not use the marshal tool with all the complex curves of this piece.
[explanation id="attachment_3792" align="alignnone" width="536"]
Mirror arrows to control mirror of parts.[/caption]
Later on putting all the holes through the original file, information technology now takes 4 hours to impress at 0.iv mm resolution.
The final result was the Spool of Thrones remixed holder . I tin can now go on half dozen tools handy side by side to the spool.
[caption id="attachment_3794" marshal="alignnone" width="421"]
The design in progress for the Spool of Thrones Holder[/caption]
H2o Mark Your Prints
With the recent controversy over someone on ebay pirating 3D modelers, it was suggested that modelers embed watermarks into their prints to deter such latent theft.
[embed]https://world wide web.youtube.com/sentinel?v=ceZRG-zrsLQ[/embed]
Cheers to TinkerCAD, it is easy to quickly embed text into your designs. After you lot generate your Creative Commons license, you can watermark information technology onto your prints to allow anyone know what your license is. Having it printed into your object will let the consumer know if their object is licensed for sale.
I'll include a gear up of Creative Commons markers in the .stl download department.
[caption id="attachment_3800" marshal="alignnone" width="587"]
Watermark embedded inside the Spool of Thrones file.[/caption]
TinkerCAD is a complimentary program, which is something whatsoever startup 3D printer loves. Its simple geometric shapes can be grouped with your imported file to quickly fix errors and customer asking from 3DHubs.
For any designer, TinkerCAD can exist a great supplemental program to your professional CAD software. Its simplicity will salve you the headaches you generate in other programs.
Source: https://medium.com/3dprinterchat/how-to-use-tinkercad-to-fix-stl-files-ae1b40120a9e
0 Response to "How to Upload an Stl File to Tinkercad"
Post a Comment